Supported coding options

Checkbox acoustic pedestrian protection

Enable/disable the checkbox in the settings in the iDrive system to turn the acoustic pedestrian protection on or off.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Acoustical lock/unlock confirmation

Enable/disable the acoustical confirmation when the car is locked/unlocked.

Values:

• Active
• Not active

Requirements:

• “Roof Function Center” FZD__08 control unit

Checkbox acoustical lock confirmation

Enable/disable the checkbox in the settings for doors/keys in the iDrive system to enable/disable the acoustical lock confirmation. If the checkbox in the iDrive system does not allow selection, please check if “Acoustical lock/unlock confirmation” in the “Roof Function Center” control unit is set to “Active“ also. Please note that the car has to be equipped with an alarm system.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Confirmation sound duration

The duration of the confirmation sound that is played when locking/unlocking the car.

Values:

• Short
• Normal
• Long
• Very long

Requirements:

• “Roof Function Center” FZD__08 control unit

Confirmation sound frequency

Values:

• Low
• Normal
• High

Requirements:

• “Roof Function Center” FZD__08 control unit

Confirmation sound volume

The volume of the confirmation sound that is played when locking/unlocking the car.

Values:

• Low
• Normal
• High
• Very high

Requirements:

• “Roof Function Center” FZD__08 control unit

Active Sound Design deactivation

Deactivate the Active Sound Design. Use a backup to revert this coding once it has been applied.

Values:

• Deactivated

Requirements:

• “Active Sound Design” ASD_01 control unit

AC on in air recirculation mode

Turn on the AC when activating the air recirculation mode.

Values:

• Active
• Not active

Requirements:

• “Air Conditioning” IHKA_PRO2 control unit

Air circulation setting memory

Enable/disable storing of the air circulation setting. If this function is active, the last used air circulation setting will be restored during the next start of the car.

Values:

• Active
• Not active

Requirements:

• “Air Conditioning” IHKA_PRO2 control unit

Apply AUTO settings to manual mode

Apply the AUTO settings when switching from the AUTO mode to the manual mode.

Values:

• Active
• Not active

Requirements:

• “Air Conditioning” IHKA_PRO2 control unit

Automatic Air Recirculation

Enable/disable the Automatic Air Recirculation function.

Values:

• Active
• Not active

Requirements:

• “Air Conditioning” IHKA_PRO2 control unit

Alarm sound

The alarm sound that is played when the alarm is triggered.

Values:

• Alarm sound Europe
• Alarm sound Great Britain
• Alarm sound USA

Requirements:

• “Roof Function Center” FZD__08 control unit

Interior motion detection

Enable/disable the interior motion detection of the alarm system. Please note that this function requires the car to be equipped with an alarm system.

Values:

• Active
• Not active

Requirements:

• “Roof Function Center” FZD__08 control unit

OBD alarm

The alarm is triggered when the vehicle is locked and communication via the OBD port is detected. Please note that this function requires the car to be equipped with an alarm system.

Values:

• Active
• Not active

Requirements:

• “Roof Function Center” FZD__08 control unit

Maximum volume at start-up

The maximum volume that is saved when the iDrive system is shut off and restored automatically on the next start-up.

Values:

• 10%
• 20%
• 25%
• 30%
• 40%
• 50%

Requirements:

• “Headunit” HU_NBT_EVO control unit

Ringtone

The ringtone that is used in case of an incoming call.

Values:

• BMW i ringtone
• BMW ringtone
• Mini ringtone
• Smartphone ringtone

Requirements:

• “Headunit” HU_NBT_EVO control unit

Warning chime

The warning chime that sounds when a warning is displayed in the car.

Values:

• BMW i warning chime
• BMW warning chime
• Mini warning chime
• Rolls Royce warning chime

Requirements:

• “Headunit” HU_NBT_EVO control unit

Auto Start Stop function

Enable/disable the Auto Start Stop function.

Values:

• Active
• Not active

Requirements:

• “Engine Control Unit” DME control unit

Auto Start Stop function memory

Save the last used Auto Start Stop function setting for the next start of the car. Please note that the Auto Start Stop function is automatically activated again in ECO PRO driving mode.

Values:

• Active
• Not active

Requirements:

• “Engine Control Unit” DME control unit

Battery capacity

The capacity of the 12 V battery. Please note that this value must only be modified if the battery in the car has been replaced. After coding, the battery replacement has to be registered using “BimmerLink” additionally.

Values:

• 20 Ah
• 50 Ah
• 60 Ah
• 69 Ah
• 70 Ah
• 80 Ah
• 90 Ah
• 105 Ah

Requirements:

• “Engine Control Unit” DME control unit

Battery type

The type of the 12 V battery. Please note that this value must only be modified if the battery in the car has been replaced. After coding, the battery replacement has to be registered using “BimmerLink” additionally.

Values:

• AGM
• EFB
• Lead acid
• Lithium-ion

Requirements:

• “Engine Control Unit” DME control unit

CarPlay fullscreen mode

Show CarPlay in full screen mode. Important: This coding only works with the iDrive software versions “NBTevo_X“ and “NBTevo_Y“. You can easily check for yourself which software version is currently installed in your vehicle. To do this, navigate to the version info in the iDrive system in your vehicle (Navigation > Settings > Position and version > Version information). If you can see “NBTevo_X“ or “NBTevo_Y“ here, then full screen mode will work. If you see “NBTevo_N“, “NBTevo_O“, “NBTevo_P“, “NBTevo_Q“, “NBTevo_R“, “NBTevo_S“, “NBTevo_U“, “NBTEvo_V“ or “NBTEvo_W“ instead, then full screen mode can not be enabled with BimmerCode unfortunately. In this case, an update of the i-level from a BMW service partner is required first.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Checkbox daytime running light

Enable/disable the checkbox in the lighting settings in the iDrive system to turn the daytime running light on or off.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Display full text messages

Enable the full display of text messages while driving. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Service history

Enable/disable the service history in the iDrive system.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Start animation

The animation that is displayed when the iDrive system is started. Please note that the animation is not visible every time you start the car, but only under certain circumstances.

Values:

• ALPINA
• BMW i
• Connected Drive
• M variant 1
• M variant 2
• MINI John Cooper Works
• MINI variant 1
• MINI variant 2
• Rolls Royce

Requirements:

• “Headunit” HU_NBT_EVO control unit

Start screen

The type of start screen that is displayed when the head unit starts up.

Values:

• Animation
• Welcome screen

Requirements:

• “Headunit” HU_NBT_EVO control unit

Tire pressure control

The displayed values of the tire pressure control in the iDrive system. Please note that the car has to be equipped with the required sensors to make this work.

Values:

• Display pressure only
• Display temperature and pressure
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Volume popup

Enable/disable the volume popup that is displayed when the volume is changed.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Lock after pulling away

Enable/disable the “Lock after pulling away“ checkbox in the settings in the iDrive system in the car.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

PDC/Top View distance switch-off threshold

The driven distance after the PDC is turned off automatically.

Values:

• 10 m
• 20 m
• 30 m
• 40 m
• 50 m
• 100 m
• 150 m
• 200 m
• 250 m

Requirements:

• “Advanced Crash Safety Module” ACSM_5 control unit
• This coding is only possible with one of the OBD adapters listed here.

PDC/Top View speed switch-off threshold

The speed at which the PDC and the Top View is turned off automatically.

Values:

• 5 km/h
• 10 km/h
• 15 km/h
• 20 km/h
• 30 km/h
• 35 km/h
• 40 km/h
• 50 km/h

Requirements:

• “Advanced Crash Safety Module” ACSM_5 control unit
• This coding is only possible with one of the OBD adapters listed here.

Rear view camera distance switch-off threshold

The driven distance after the rear view camera is turned off automatically.

Values:

• 10 m
• 20 m
• 30 m
• 40 m
• 50 m
• 100 m
• 150 m
• 200 m
• 250 m

Requirements:

• “Advanced Crash Safety Module” ACSM_5 control unit
• This coding is only possible with one of the OBD adapters listed here.

Rear view camera speed switch-off threshold

The speed at which the rear view camera is turned off automatically.

Values:

• 5 km/h
• 10 km/h
• 14 km/h
• 15 km/h
• 20 km/h
• 30 km/h
• 36 km/h
• 40 km/h
• 50 km/h

Requirements:

• “Advanced Crash Safety Module” ACSM_5 control unit
• This coding is only possible with one of the OBD adapters listed here.

Initial seat belt reminder after start

Activate/deactivate the initial acoustic seat belt reminder after the car is started.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_5 control unit
• This coding is only possible with one of the OBD adapters listed here.

Seat belt indicator driver seat

Activate/deactivate the seat belt indicator in the instrument cluster for the driver seat.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_5 control unit
• This coding is only possible with one of the OBD adapters listed here.

Seat belt indicator passenger seat

Activate/deactivate the seat belt indicator in the instrument cluster for the passenger seat.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_5 control unit
• This coding is only possible with one of the OBD adapters listed here.

Seat belt reminder driver seat

Activate/deactivate the acoustic and visual seat belt reminder for the driver seat.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_5 control unit
• This coding is only possible with one of the OBD adapters listed here.

Seat belt reminder passenger seat

Activate/deactivate the acoustic and visual seat belt reminder for the passenger seat.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_5 control unit
• This coding is only possible with one of the OBD adapters listed here.

Additional video codecs and formats

Activate additional video codecs and formats (Ogg, Xvid and VCD). Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Video in motion

Enable video in motion. Please note the instructions displayed after coding.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Video via USB

Enable video playback from USB storage media. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Camera warning

Disable the warning that is displayed when using one of the cameras. Use a backup to revert this coding once it has been applied.

Values:

• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Night vision warning

Disable the warning that is displayed when using the night vision camera. Use a backup to revert this coding once it has been applied.

Values:

• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Warning at start-up

Disable the warning that is displayed when the iDrive system is started. Use a backup to revert this coding once it has been applied.

Values:

• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit