Supported coding options

Checkbox acoustic pedestrian protection

Enable/disable the checkbox in the settings in the iDrive system to turn the acoustic pedestrian protection on or off.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Remember acoustic pedestrian protection setting

Enable/disable the storage of the last used acoustic pedestrian protection setting.

Values:

• Active
• Not active

Requirements:

• “Vehicle Sound Generator” VSG01 control unit

Acoustical lock/unlock confirmation

Enable/disable the acoustical confirmation when the car is locked/unlocked.

Values:

• Active
• Not active

Requirements:

• “Roof Function Center” FZD__08 control unit

Checkbox acoustical lock confirmation

Enable/disable the checkbox in the settings for doors/keys in the iDrive system to enable/disable the acoustical lock confirmation. If the checkbox in the iDrive system does not allow selection, please check if “Acoustical lock/unlock confirmation” in the “Roof Function Center” control unit is set to “Active“ also. Please note that the car has to be equipped with an alarm system.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Confirmation sound duration

The duration of the confirmation sound that is played when locking/unlocking the car.

Values:

• Short
• Normal
• Long
• Very long

Requirements:

• “Roof Function Center” FZD__08 control unit

Confirmation sound frequency

Values:

• Low
• Normal
• High

Requirements:

• “Roof Function Center” FZD__08 control unit

Confirmation sound volume

The volume of the confirmation sound that is played when locking/unlocking the car.

Values:

• Low
• Normal
• High
• Very high

Requirements:

• “Roof Function Center” FZD__08 control unit

Active Cruise Control default distance

The default distance level of the Active Cruise Control on activation.

Values:

• Level 1
• Level 2
• Level 3
• Level 4

Requirements:

• “Integrated Chassis Management” ICMQL control unit

Active Sound Design deactivation

Deactivate the Active Sound Design. Use a backup to revert this coding once it has been applied.

Values:

• Deactivated

Requirements:

• “Active Sound Design” ASD_01 control unit

Air circulation setting memory

Enable/disable storing of the air circulation setting. If this function is active, the last used air circulation setting will be restored during the next start of the car.

Values:

• Active
• Not active

Requirements:

• “Air Conditioning” IHKA_CBF control unit

Air conditioning on in AUTO mode

Enable/disable the automatic activation of the air conditioning when the AUTO mode is turned on.

Values:

• Active
• Not active

Requirements:

• “Air Conditioning” IHKA_CBF control unit

Air conditioning setting memory

Enable/disable storing of the air conditioning setting. If this function is active, the last used air conditioning setting will be restored during the next start of the car.

Values:

• Active
• Not active

Requirements:

• “Air Conditioning” IHKA_CBF control unit

Alarm sound

The alarm sound that is played when the alarm is triggered.

Values:

• Alarm sound Europe
• Alarm sound Great Britain
• Alarm sound USA

Requirements:

• “Roof Function Center” FZD__08 control unit

Interior motion detection

Enable/disable the interior motion detection of the alarm system. Please note that this function requires the car to be equipped with an alarm system.

Values:

• Active
• Not active

Requirements:

• “Roof Function Center” FZD__08 control unit

OBD alarm

The alarm is triggered when the vehicle is locked and communication via the OBD port is detected. Please note that this function requires the car to be equipped with an alarm system.

Values:

• Active
• Not active

Requirements:

• “Roof Function Center” FZD__08 control unit

Ambient lighting brightness decoupling from instrument cluster

Enable/disable the decoupling of the brightness of the ambient lighting from the brightness of the instrument cluster.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Ambient lighting color bottom

The color of the ambient lighting in the bottom part of the interior for the color setting “Orange”.

Values:

• EfficientDynamics blue
• Green
• Iceblue
• Light blue
• Light green
• Light red
• Orange
• Pink
• Red
• Turquoise
• Violet
• White
• Yellow

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Ambient lighting color center

The color of the ambient lighting in the center part of the interior for the color setting “Orange”.

Values:

• EfficientDynamics blue
• Green
• Iceblue
• Light blue
• Light green
• Light red
• Orange
• Pink
• Red
• Turquoise
• Violet
• White
• Yellow

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Ambient lighting color top

The color of the ambient lighting in the top part of the interior for the color setting “Orange”.

Values:

• EfficientDynamics blue
• Green
• Iceblue
• Light blue
• Light green
• Light red
• Orange
• Pink
• Red
• Turquoise
• Violet
• White
• Yellow

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Angel Eyes brightness

The brightness of the Angel Eyes with low beam or parking lights. Use a backup to revert this coding once it has been applied. Please note that this coding has to be carried out for both headlights (left and right) separately.

Values:

• 100%

Requirements:

• “Front Light Electronics” FLE_02 control unit

Angel Eyes brightness low beam

The brightness of the Angel Eyes with low beam.

Values:

• 10%
• 20%
• 30%
• 40%
• 50%
• 60%
• 70%
• 80%
• 90%
• 100%

Requirements:

• “Body Domain Controller” BDC_BODY or “Headlight Driver Module left” TMS_03 or “Headlight Driver Module right” TMS_03 control unit

Angel Eyes brightness parking lights

The brightness of the Angel Eyes with parking lights.

Values:

• 10%
• 20%
• 30%
• 40%
• 50%
• 60%
• 70%
• 80%
• 90%
• 100%

Requirements:

• “Body Domain Controller” BDC_BODY or “Headlight Driver Module left” TMS_03 or “Headlight Driver Module right” TMS_03 control unit

Bluetooth audio streaming

This coding enables wireless audio streaming via Bluetooth. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Maximum volume at start-up

The maximum volume that is saved when the iDrive system is shut off and restored automatically on the next start-up.

Values:

• 10%
• 20%
• 25%
• 30%
• 40%
• 50%

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Ringtone

The ringtone that is used in case of an incoming call.

Values:

• BMW i ringtone
• BMW ringtone
• Mini ringtone
• Smartphone ringtone

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Shut off iDrive system when driver door is opened

Enable/disable the automatic shut-off of the iDrive system when the driver door is opened.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Warning chime

The warning chime that sounds when a warning is displayed in the car.

Values:

• BMW i warning chime
• BMW warning chime
• Mini warning chime
• Rolls Royce warning chime

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Auto Start Stop function in ECO mode

Enable/disable the automatic activation of the Auto Start Stop function in ECO PRO driving mode.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Auto Start Stop function memory

Save the last used Auto Start Stop function setting for the next start of the car. Please note that the Auto Start Stop function is automatically activated again in ECO PRO driving mode.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Auto Start Stop function off by default

Set the Auto Start Stop function to off by default when the car is started. Please note that the Auto Start Stop function is automatically activated again in ECO PRO driving mode.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Battery type

The type and capacity of the 12 V battery. Please note that this value must only be modified if the battery in the car has been replaced. After coding, the battery replacement has to be registered using “BimmerLink” additionally.

Values:

• 20 Ah
• 40 Ah
• 40 Ah AGM
• 46 Ah
• 55 Ah AGM
• 60 Ah AGM
• 60 Ah EFB
• 70 Ah
• 70 Ah AGM
• 70 Ah EFB
• 80 Ah
• 80 Ah AGM
• 80 Ah EFB
• 90 Ah
• 90 Ah AGM
• 105 Ah AGM

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Blind spot detection activation speed

The speed at which the blind spot detection system is activated.

Values:

• 10 km/h
• 20 km/h
• 30 km/h
• 50 km/h

Requirements:

• “Integrated Chassis Management” ICMQL control unit

Brake Force Display activation brake force

The brake deceleration at which the Brake Force Display is activated.

Values:

• Weak braking (5 m/s²)
• Medium braking (7 m/s²)
• Hard braking (8 m/s²)

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Brake Force Display activation speed

The speed at which the Brake Force Display is activated.

Values:

• 5 km/h
• 10 km/h
• 20 km/h
• 30 km/h
• 40 km/h
• 50 km/h

Requirements:

• “Body Domain Controller” BDC_BODY control unit

CarPlay fullscreen mode

Show CarPlay in full screen mode. Important: This coding only works with the iDrive software versions “NBTevo_X“ and “NBTevo_Y“. You can easily check for yourself which software version is currently installed in your vehicle. To do this, navigate to the version info in the iDrive system in your vehicle (Navigation > Settings > Position and version > Version information). If you can see “NBTevo_X“ or “NBTevo_Y“ here, then full screen mode will work. If you see “NBTevo_N“, “NBTevo_O“, “NBTevo_P“, “NBTevo_Q“, “NBTevo_R“, “NBTevo_S“, “NBTevo_U“, “NBTEvo_V“ or “NBTEvo_W“ instead, then full screen mode can not be enabled with BimmerCode unfortunately. In this case, an update of the i-level from a BMW service partner is required first.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Convenient closing

Enable/disable the convenient closing. During convenient closing the windows are closed and the power folding mirrors are folded in. To trigger convenient closing the lock button on the remote control has to be pressed and held. Please note that this option does not work for convertibles.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Convenient closing delay

The delay for the convenient closing before the windows are closed.

Values:

• 0.5 seconds
• 1 second
• 1.5 seconds
• No delay

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Convenient closing delay front windows

The delay at which the front windows are closed during convenient closing.

Values:

• 0.5 seconds
• 1 second
• 1.5 seconds
• No delay

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Convenient closing delay sunroof

The delay as of with the sunroof is closed during convenient closing.

Values:

• 0.5 seconds
• 1 second
• 1.5 seconds
• 3.5 seconds
• No delay

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Convenient closing with Comfort Access

Enable/disable the convenient closing with the Comfort Access. For convenient closing with the Comfort Access the door handle has to be touched and held at the ribbed surface. Please note that this option does not work for convertibles.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Convenient closing with remote control

Enable/disable the convenient closing with the remote control. For convenient closing with the remote control, the lock button has to be pressed and held. Please note that this option does not work for convertibles.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Convenient opening

Enable/disable the convenient opening. During convenient opening the windows are opened and the power folding mirrors are unfolded. For a convenient opening the unlock button on the remote control has to be pressed and held. When using Comfort Access, the door handle has to be gripped and held.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Convenient opening delay

The delay for the convenient opening before the windows are opened.

Values:

• 0.5 seconds
• 1 second
• 1.5 seconds
• 2 seconds
• 2.5 seconds

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Convenient opening delay rear windows

The delay at which the rear windows are opened during convenient opening.

Values:

• 0.5 seconds
• 1 second
• 1.5 seconds
• No delay

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Convenient opening delay sunroof

The delay as of with the sunroof is opened during convenient opening.

Values:

• 0.5 seconds
• 1 second
• 1.5 seconds
• 3.5 seconds
• No delay

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Convenient opening with remote control

Enable/disable the convenient opening with the remote control. For convenient opening with the remote control, the unlock button has to be pressed and held.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Checkbox daytime running light

Enable/disable the checkbox in the lighting settings in the iDrive system to turn the daytime running light on or off.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Daytime running light mode

The daytime running light mode.

Values:

• Active
• Active also with parking lights
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Daytime running light tail lights inner part

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Daytime running light tail lights outer part

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Display full text messages

Enable the full display of text messages while driving. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Rear view camera zoom

Enable/disable the rear view camera zoom to the trailer hitch.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Service history

Enable/disable the service history in the iDrive system.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Start animation

The animation that is displayed when the iDrive system is started. Please note that the animation is not visible every time you start the car, but only under certain circumstances.

Values:

• ALPINA
• BMW 1
• BMW 2
• BMW i
• Christmas
• Connected Drive 1
• Connected Drive 2
• M variant 1
• MINI variant 1
• Rolls Royce

Requirements:

• “Headunit” HU_NBT control unit

Start animation

The animation that is displayed when the iDrive system is started. Please note that the animation is not visible every time you start the car, but only under certain circumstances.

Values:

• ALPINA
• BMW i
• Connected Drive
• M variant 1
• M variant 2
• MINI John Cooper Works
• MINI variant 1
• MINI variant 2
• Rolls Royce

Requirements:

• “Headunit” HU_NBT_EVO control unit

Start screen

The type of start screen that is displayed when the head unit starts up.

Values:

• Animation
• Welcome screen

Requirements:

• “Headunit” HU_NBT_EVO control unit

Tire pressure control

The displayed values of the tire pressure control in the iDrive system. Please note that the car has to be equipped with the required sensors to make this work.

Values:

• Display pressure only
• Display temperature and pressure
• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Volume popup

Enable/disable the volume popup that is displayed when the volume is changed.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Additional digital speed in speedometer

Enable/disabled the additional digital speed display in speedometer.

Values:

• km/h
• mph
• Not active

Requirements:

• “Instrument Cluster” KOMBI FPK_I12 control unit

Average values reset

The average speed and consumption is reset after the set time automatically.

Values:

• After 4 hours
• After 8 hours
• After every ride
• Never

Requirements:

• “Instrument Cluster” KOMBI FPK_I12 or “Instrument Cluster” KOMBI L6 BO control unit

Digital speed in board computer

Enable/disable the display of the digital speed in the board computer. Please toggle the displayed information in the board computer with the button in the turn signal lever until the specific display appears.

Values:

• Active
• Not active

Requirements:

• “Instrument Cluster” KOMBI L6 BO control unit

Empty menu item in board computer

Enable/disable the empty menu item in the board computer.

Values:

• Active
• Not active

Requirements:

• “Instrument Cluster” KOMBI FPK_I12 or “Instrument Cluster” KOMBI L6 BO control unit

M Performance logo

The model-specific M Performance logo that is displayed in the bottom right in the instrument cluster.

Values:

• Not active
• BMW
• M Performance
• BMW i
• M Performance X5
• M Performance X6

Requirements:

• “Instrument Cluster” KOMBI FPK_I12 control unit

Speedometer scale end value

The end value of the speedometer in the instrument cluster.

Values:

• 160_MPH
• 260_KMH
• 300_KMH
• 330_KMH

Requirements:

• “Instrument Cluster” KOMBI FPK_I12 control unit

Start logo

The logo that is displayed in the center of the screen during the start-up of the instrument cluster.

Values:

• BMW
• BMW i
• M Performance
• M Performance X5
• M Performance X6

Requirements:

• “Instrument Cluster” KOMBI FPK_I12 control unit

“Speed Limit Info” road sign type

The road sign type of the “Speed Limit Info”. Please note that the car has to be equipped with the “Speed Limit Info” by factory.

Values:

• Country-specific
• Default
• White Europe
• White USA

Requirements:

• “Camera-based Driver Assistance System” KAFAS control unit

Horn signal when locking the car with engine running

Enable/disable the horn signal that sounds when locking the car with the engine running.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Lock after pulling away

Enable/disable the “Lock after pulling away“ checkbox in the settings in the iDrive system in the car.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Time until automatic lock

The car is locked automatically again if it has been unlocked and no door has been opened within the set time.

Values:

• 10 seconds
• 30 seconds
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Unlock doors automatically

Enable/disable the automatic unlock of the doors when the ignition is turned off.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Window lifter interruption when opening a door

Enable/disable the window lifter interruption when a door is opened.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Road edge warning

Enable/disable the road edge warning of the lane departure warning.

Values:

• Curb stone only
• Grass and curb stone
• Grass only
• Not active

Requirements:

• “Camera-based Driver Assistance System” KAFAS control unit

Default driving mode

The default driving mode on start-up.

Values:

• Comfort
• ECO PRO
• ECO PRO+
• Sport

Requirements:

• “Body Domain Controller” BDC_BODY or “Integrated Chassis Management” ICMQL control unit

Driving mode memory

Enable the driving mode memory. The last used driving mode is stored when the car is turned off and restored on the next start-up. Use a backup to revert this coding once it has been applied.

Values:

• 15 minutes
• Always
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY or “Integrated Chassis Management” ICMQL control unit

Easy entry protection area

The protection area limits the rearward travel of the seat when easy entry is activated.

Values:

• 0 mm
• 10 mm
• 20 mm
• 30 mm
• 40 mm
• 50 mm
• 60 mm
• 70 mm
• 80 mm
• 90 mm
• 100 mm

Requirements:

• “Seat Module Passenger” CBFS_PLX_1 or “Seat Module Driver” CFAS_PLX_1 control unit

Easy entry seat movement

In order to make it easier to get in the car, the seat is automatically moved back when unlocked and then returns to its original position when the ignition is switched on. Please note that the car has to be equipped with electrically adjustable seats with memory function.

Values:

• Active

Requirements:

• “Seat Module Passenger” CBFS_PLX_1 or “Seat Module Driver” CFAS_PLX_1 control unit

Easy entry seat travel

The seat travel of the seat when easy entry is activated.

Values:

• 10 mm
• 20 mm
• 30 mm
• 40 mm
• 50 mm
• 60 mm
• 70 mm
• 80 mm
• 90 mm
• 100 mm

Requirements:

• “Seat Module Passenger” CBFS_PLX_1 or “Seat Module Driver” CFAS_PLX_1 control unit

Low fuel warning 1

The remaining range at which the permanent low fuel warning is displayed.

Values:

• 10 kilometers
• 10 miles
• 20 kilometers
• 20 miles
• 30 kilometers
• 30 miles
• 40 kilometers
• 50 kilometers
• Not active

Requirements:

• “Instrument Cluster” KOMBI FPK_I12 or “Instrument Cluster” KOMBI L6 BO control unit

Low fuel warning 2

The remaining range at which the temporary low fuel warning is displayed.

Values:

• 40 miles
• 50 kilometers
• 50 miles
• 60 kilometers
• 70 kilometers
• 80 kilometers
• 90 kilometers
• Not active

Requirements:

• “Instrument Cluster” KOMBI FPK_I12 or “Instrument Cluster” KOMBI L6 BO control unit

HUD music lists

Enable/disable music lists in the HUD.

Values:

• Active
• Not active

Requirements:

• “Instrument Cluster” KOMBI FPK_I12 or “Instrument Cluster” KOMBI L6 BO control unit

HUD phone book

Enable/disable the telephone book in the HUD.

Values:

• Active
• Not active

Requirements:

• “Instrument Cluster” KOMBI L6 BO control unit

HUD telephone list

Enable/disable the telephone list in the HUD.

Values:

• Active
• Not active

Requirements:

• “Instrument Cluster” KOMBI L6 BO control unit

HUD turn signals (1 of 2)

Enable/disable the turn signals in the HUD. Please note that “HUD turn signals (2 of 2)” in the “Headunit” control unit has to be enabled additionally. This function is not supported, if the car is equipped with a fully digital instrument cluster.

Values:

• Active
• Not active

Requirements:

• “Instrument Cluster” KOMBI FPK_I12 or “Instrument Cluster” KOMBI L6 BO control unit

HUD turn signals (2 of 2)

Enable/disable the turn signals in the HUD. Please note that “HUD turn signals (1 of 2)” in the “Instrument Cluster” control unit has to be enabled additionally. It may also be necessary to enable the corresponding checkbox in the HUD settings in the iDrive system in the car. This function is not supported, if the car is equipped with a fully digital instrument cluster.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

HUD voice input

Enabled/disable voice input display in the HUD.

Values:

• Active
• Not active

Requirements:

• “Instrument Cluster” KOMBI L6 BO control unit

Headlight cleaning blocking time

The blocking time between headlight cleaning activations.

Values:

• 1 minute
• 2 minutes
• 3 minutes
• 4 minutes
• 5 minutes
• 6 minutes
• 7 minutes
• 8 minutes
• 9 minutes
• 10 minutes

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Headlight cleaning pause between injection pulses

The pause between the injection pulses of the headlight cleaning system.

Values:

• 200 ms
• 400 ms
• 600 ms
• 800 ms
• 1000 ms
• 1200 ms
• 1400 ms
• 1600 ms
• 1800 ms
• 2000 ms

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Headlight cleaning system deactivation speed threshold

The deactivation speed threshold at which the headlight cleaning system is deactivated.

Values:

• 10 km/h
• 20 km/h
• 30 km/h
• 40 km/h
• 50 km/h
• 60 km/h
• 70 km/h
• 80 km/h
• 90 km/h
• 100 km/h
• 110 km/h
• 120 km/h
• 130 km/h
• 140 km/h
• 150 km/h

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Headlight washers

Activate/deactivate the headlight washers.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Number of washing operations for headlight cleaning

The number of washing operations at which the headlight cleaning is turned on.

Values:

• 1 operation
• 5 operations
• 10 operations

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Number of water injection pulses during headlight cleaning

The number of water injection pulses during headlight cleaning.

Values:

• 1 time
• 2 times
• 3 times

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Water injection duration for headlight cleaning

The duration of the water injection pulses of the headlight cleaning system.

Values:

• 200 ms
• 400 ms
• 600 ms
• 800 ms
• 1000 ms
• 1200 ms
• 1400 ms
• 1600 ms
• 1800 ms
• 2000 ms

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion Brake Force Display

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion bi-xenon

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion brake light

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion center brake light

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion daytime running lights

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion fog lights

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion front turn signal

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion high beam

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion inner tail lights

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion license plate light

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion low beam

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion outer tail lights

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion position lights

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion rear fog light

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion rear turn signals

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion reversing light

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion side turn signal

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

LED conversion sidemarkers

Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Automatic light control

The lighting switch position where the automatic light control is active. To prevent the low beam to come on when the switch is set to “0”, use the option “Active in position A”.

Values:

• Active in position A
• Active in position A and 0

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Door handle lights when reverse gear is engaged

Enable/disable the automatic activation of the lights in the door handles when the reverse gear is engaged.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Fog lights off with high beam

Enable/disable the automatic switch-off of the fog lights when the high beam is turned on.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Fog lights with parking lights

Allows the fog lights to be turned on with parking lights.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Hazard warning signal after emergency braking

The hazard warning signal is activated automatically after an emergency braking.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Rain-light-sensor sensitivity

The sensitivity of the rain-light-sensor that affects the automatic wiper and light activation.

Values:

• Default
• Insensitive
• Normal
• Sensititve
• Very sensitive

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Sidemarkers

Disable the sidemarkers in US cars. Use a backup to revert this coding once it has been applied. Please note that this coding has to be carried out for both headlights (left and right) separately.

Values:

• Deactivated

Requirements:

• “Headlight Driver Module left” TMS_03 or “Headlight Driver Module right” TMS_03 control unit

Automatic mirror tilt

Enable/disable the automatic mirror tilt for the right mirror, when the reverse gear is engaged. Please note that your car has to be equipped with power folding mirrors. Make sure the button in the door for selecting the mirror is set to the driver side also.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Automatic mirror tilt value

The tilt value of the right mirror, when the reverse gear is engaged.

Values:

• 10%
• 20%
• 30%
• 40%
• 50%
• 60%
• 70%
• 80%
• 90%
• 100%

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Fold mirrors with convenient closing

Enable/disable the folding of the mirrors when using convenient closing. Please note that your car has to be equipped with power folding mirrors and that this option does not work for convertibles.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Fold/unfold mirrors automatically

The mirrors are folded automatically when the car is locked with the remote control or Comfort Access and unfolded when the car is unlocked. Please note that your car has to be equipped with power folding mirrors and that this option does not work for convertibles. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Mirror folding speed threshold

The maximum speed at which the mirrors can be folded.

Values:

• 5 km/h
• 10 km/h
• 20 km/h
• 30 km/h
• 40 km/h
• 50 km/h

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Mirror unfolding speed threshold

The speed at which the mirrors are unfolded automatically.

Values:

• 5 km/h
• 10 km/h
• 20 km/h
• 30 km/h
• 40 km/h
• 50 km/h

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Unfold mirrors with convenient opening

Enable/disable the unfolding of the mirrors when using convenient opening.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Activate PDC when rolling backwards

Enable/disable the automatic activation of the PDC when the car starts rolling backwards.

Values:

• Active
• Not active

Requirements:

• “Park Distance Control” PMA_PDC control unit

PDC distance switch-off threshold

The driven distance after the PDC is turned off automatically.

Values:

• 10 m
• 20 m
• 30 m
• 40 m
• 50 m
• 100 m
• 150 m
• 200 m
• 250 m

Requirements:

• “Park Distance Control” PMA_PDC control unit

PDC speed switch-off threshold

The speed at which the PDC is turned off automatically.

Values:

• 5 km/h
• 10 km/h
• 15 km/h
• 20 km/h
• 30 km/h
• 35 km/h
• 36 km/h
• 40 km/h
• 50 km/h

Requirements:

• “Park Distance Control” PMA_PDC control unit

Rear view camera distance switch-off threshold

The driven distance after the rear view camera is turned off automatically.

Values:

• 10 m
• 20 m
• 30 m
• 40 m
• 50 m
• 100 m
• 150 m
• 200 m
• 250 m

Requirements:

• “Park Distance Control” PMA_PDC control unit

Rear view camera speed switch-off threshold

The speed at which the rear view camera is turned off automatically.

Values:

• 5 km/h
• 10 km/h
• 13 km/h
• 15 km/h
• 20 km/h
• 30 km/h
• 36 km/h
• 40 km/h
• 50 km/h

Requirements:

• “Park Distance Control” PMA_PDC control unit

HiFi loudspeaker system

Coding for a retrofitted HiFi loudspeaker system. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Headunit” HU_NBT control unit

Front backrests temperature level 1

The temperature of the front backrests for seat heating level 1.

Values:

• 30 °C
• 31 °C
• 32 °C
• 33 °C
• 34 °C
• 35 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Front backrests temperature level 2

The temperature of the front backrests for seat heating level 2.

Values:

• 36 °C
• 37 °C
• 38 °C
• 39 °C
• 40 °C
• 41 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Front backrests temperature level 3

The temperature of the front backrests for seat heating level 3.

Values:

• 42 °C
• 43 °C
• 44 °C
• 45 °C
• 46 °C
• 47 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Front seats temperature level 1

The temperature of the front seats for seat heating level 1.

Values:

• 30 °C
• 31 °C
• 32 °C
• 33 °C
• 34 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Front seats temperature level 2

The temperature of the front seats for seat heating level 2.

Values:

• 35 °C
• 36 °C
• 37 °C
• 38 °C
• 39 °C
• 40 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Front seats temperature level 3

The temperature of the front seats for seat heating level 3.

Values:

• 41 °C
• 42 °C
• 43 °C
• 44 °C
• 45 °C
• 46 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Rear backrests temperature level 1

The temperature of the rear backrests for seat heating level 1.

Values:

• 30 °C
• 31 °C
• 32 °C
• 33 °C
• 34 °C
• 35 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Rear backrests temperature level 2

The temperature of the rear backrests for seat heating level 2.

Values:

• 36 °C
• 37 °C
• 38 °C
• 39 °C
• 40 °C
• 41 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Rear backrests temperature level 3

The temperature of the rear backrests for seat heating level 3.

Values:

• 42 °C
• 43 °C
• 44 °C
• 45 °C
• 46 °C
• 47 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Rear seats temperature level 1

The temperature of the rear seats for seat heating level 1.

Values:

• 30 °C
• 31 °C
• 32 °C
• 33 °C
• 34 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Rear seats temperature level 2

The temperature of the rear seats for seat heating level 2.

Values:

• 35 °C
• 36 °C
• 37 °C
• 38 °C
• 39 °C
• 40 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Rear seats temperature level 3

The temperature of the rear seats for seat heating level 3.

Values:

• 41 °C
• 42 °C
• 43 °C
• 44 °C
• 45 °C
• 46 °C

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Seat heating/cooling setting memory

The memory duration of the seat heating/cooling settings.

Values:

• 15 minutes
• 24 hours
• Do not save
• Unlimited

Requirements:

• “Seat Module Passenger” CBFS_PLX_1 or “Seat Module Driver” CFAS_PLX_1 control unit

Initial seat belt reminder after start

Activate/deactivate the initial acoustic seat belt reminder after the car is started.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_4C control unit

Seat belt indicator driver seat

Activate/deactivate the seat belt indicator in the instrument cluster for the driver seat.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_4C control unit

Seat belt indicator passenger seat

Activate/deactivate the seat belt indicator in the instrument cluster for the passenger seat.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_4C control unit

Seat belt indicator rear seats

Activate/deactivate the seat belt indicator in the instrument cluster for the rear seats.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_4C control unit

Seat belt reminder distance

Driven distance at which th seat belt reminder is activated.

Values:

• 50 m
• 100 m
• 200 m
• 500 m

Requirements:

• “Advanced Crash Safety Module” ACSM_4C control unit

Seat belt reminder driver seat

Activate/deactivate the acoustic and visual seat belt reminder for the driver seat.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_4C control unit

Seat belt reminder duration

Duration at which the seat belt reminder stays active.

Values:

• 5 seconds
• 10 seconds
• 15 seconds
• 20 seconds
• 30 seconds
• 45 seconds
• 60 seconds
• 90 seconds

Requirements:

• “Advanced Crash Safety Module” ACSM_4C control unit

Seat belt reminder passenger seat

Activate/deactivate the acoustic and visual seat belt reminder for the passenger seat.

Values:

• Active
• Not active

Requirements:

• “Advanced Crash Safety Module” ACSM_4C control unit

Seat belt reminder speed

Speed at which th seat belt reminder is activated.

Values:

• 8 km/h
• 10 km/h
• 20 km/h
• 30 km/h
• 40 km/h
• 50 km/h

Requirements:

• “Advanced Crash Safety Module” ACSM_4C control unit

Activation speed threshold side view camera

The speed at which the side view camera can be activated.

Values:

• 15 km/h
• No speed limit

Requirements:

• “Allround View Camera” iCAM control unit

Deactivation speed threshold side view camera

The speed at which the side view camera is deactivated.

Values:

• 15 km/h
• No speed limit

Requirements:

• “Allround View Camera” iCAM control unit

Sport displays

Enable/disable the Sport displays in the iDrive system. Please note that in some cars the engine control unit does not transmit the required values to the headunit and in this case the Sport displays will be displayed but remain functionless.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Sport displays color

The color of the Sport displays in the iDrive system.

Values:

• Orange
• Red

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Steering wheel heating memory

The activation of the steering wheel heating is saved and restored the next time the vehicle is started.

Values:

• 15 minutes
• 24 hours
• Do not save
• Unlimited

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Boot lid opening delay

The delay when opening the boot lid with the remote control. This value can be increased to prevent accidental openings of the boot lid.

Values:

• 0.5 seconds
• 0.7 seconds
• 1 second
• 5 seconds
• 10 seconds
• No delay

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Close tailgate with button in the interior

Enable/disable closing the tailgate with the button in the interior.

Values:

• Active
• Not active

Requirements:

• “Tailgate Function Module” HKFM control unit

Close tailgate with button in the interior without long press

Enable/disable the closing of the tailgate with the button in the interior without a long press.

Values:

• Active
• Not active

Requirements:

• “Tailgate Function Module” HKFM2 control unit

Close tailgate with remote control

Enable/disable closing of the tailgate with the remote control.

Values:

• Active
• Not active

Requirements:

• “Tailgate Function Module” HKFM control unit

Close tailgate with remote without long press

Enable/disable closing the tailgate with the remote control without a long press.

Values:

• Active
• Not active

Requirements:

• “Tailgate Function Module” HKFM control unit

Close tailgate with the remote control without long press

Enable/disable closing the tailgate without a long press of the button on the remote control.

Values:

• Active
• Not active

Requirements:

• “Tailgate Function Module” HKFM2 control unit

Open tailgate after unlock only

The tailgate can only be opened after unlocking the car with the remote control. Please note that “Tailgate“ has to be selected for the tailgate button in the settings in the iDrive system in the car.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Tailgate function remote control

The tailgate function that is triggered when the button on the remote is pressed.

Values:

• Open
• Open and close

Requirements:

• “Tailgate Function Module” HKFM2 control unit

Tailgate function when pulling the button in the interior

The tailgate function that is triggered when the button in the interior is pulled up.

Values:

• Close
• Deactivated

Requirements:

• “Tailgate Function Module” HKFM2 control unit

Tailgate function when pushing the button in the interior

The tailgate function that is triggered when the button in the interior is pushed down.

Values:

• Deactivated
• Open
• Open and close

Requirements:

• “Tailgate Function Module” HKFM2 control unit

Warning sound when closing the tailgate with remote control

A warning signal sounds when the tailgate is closed with the remote control.

Values:

• Active
• Not active

Requirements:

• “Tailgate Function Module” HKFM2 control unit

Warning sound when closing the tailgate with the button in the interior

A warning signal sounds when the tailgate is closed with the button in the interior.

Values:

• Active
• Not active

Requirements:

• “Tailgate Function Module” HKFM2 control unit

Sport Automatic Transmission

Enable/disable the Sport Automatic Transmission.

Values:

• Active
• Not active

Requirements:

• “Electronic Transmission Control” GKEB23 control unit

Turn signals flashing on locking

Number of turn signal flashes when locking the car.

Values:

• 1 time
• 2 times
• 3 times
• Off

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Turn signals flashing on unlocking

Number of turn signal flashes when unlocking the car.

Values:

• 1 time
• 2 times
• 3 times
• Off

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Additional video codecs and formats

Activate additional video codecs and formats (Ogg, Xvid and VCD). Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Video in motion

Activate video in motion. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Headunit” HU_NBT control unit

Video in motion

Enable video in motion. Please note the instructions displayed after coding.

Values:

• Active
• Not active

Requirements:

• “Headunit” HU_NBT_EVO control unit

Video via USB

Enable video playback from USB storage media. Use a backup to revert this coding once it has been applied.

Values:

• Active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Camera warning

Disable the warning that is displayed when using one of the cameras. Use a backup to revert this coding once it has been applied.

Values:

• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Night vision warning

Disable the warning that is displayed when using the night vision camera. Use a backup to revert this coding once it has been applied.

Values:

• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Warning at start-up

Disable the warning that is displayed when the iDrive system is started. Use a backup to revert this coding once it has been applied.

Values:

• Not active

Requirements:

• “Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit

Welcome Light activation

The position of the light switch at which the Welcome Light is activated.

Values:

• Light switch on auto
• Light switch on auto or 2
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Light in darkness only

Enable/disable the activation of the Welcome light in darkness only.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Light lighting duration

The lighting duration of the Welcome Light.

Values:

• 5 seconds
• 10 seconds
• 15 seconds
• 20 seconds
• 30 seconds
• 45 seconds
• 60 seconds

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights brake lights

The brake lights are turned on with the Welcome Lights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights brightness

The brightness of the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

Values:

• 10%
• 20%
• 30%
• 40%
• 50%
• 60%
• 70%
• 80%
• 90%
• 100%

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights central turn signals

The central turn signals are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights daytime running light

The daytime running light is turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights design lights

The design lights are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights fog lights

The fog lights are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights front turn signals

The front turn signals are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights high beam

The high beam is turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights inner rear parking lights

The inner rear parking lights are turned on with the Welcome Lights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights license plate lights

The license plate lights are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights low beam

The low beam is turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights outer rear parking lights

The outer rear parking lights are turned on with the Welcome Lights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights parking lights front

The front parking lights are turned on with the Welcome Lights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights rear fog light left

The left rear fog light is turned on with the Welcome Lights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights rear fog light right

The right rear fog light is turned on with the Welcome Lights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights reversing light left

The left reversing light is turned on with the Welcome Lights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights reversing light right

The right reversing light is turned on with the Welcome Lights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights third brake light.

The third brake light is turned on with the Welcome Lights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Welcome Lights turn signals front

The front turn signals are turned on with the Welcome Lights.

Values:

• Hard on
• Off
• Soft on

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Complete wiper cycle

Enable/disable the completion of the wiper cycle when the car is turned off.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Wipe cycles after front washing

The number of wipe cycles after front washing

Values:

• 1 time
• 2 times
• 3 times
• 4 times
• 5 times

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Wipe cycles after rear washing

The number of wipe cycles after rear washing.

Values:

• 1 time
• 2 times
• 3 times
• 4 times
• 5 times

Requirements:

• “Body Domain Controller” BDC_BODY control unit

Wiper level switch back when stationary

Enable/disable the automatic switch back of the wiper level when the car becomes stationary.

Values:

• Active
• Not active

Requirements:

• “Body Domain Controller” BDC_BODY control unit