Supported coding options

BMW 3 Series, M3
E90, E91, E92, E93
  • Acoustical lock/unlock confirmation

    Enable/disable the acoustical confirmation when the car is locked/unlocked.

    Values:
    • Active
    • Not active
    Requirements:
    • “Anti-theft alarm system” DWA_63 or “Anti-theft alarm system” DWA_IRS control unit
  • Checkbox acoustical lock confirmation

    Enable/disable the checkbox in the settings for doors/keys in the iDrive system to enable/disable the acoustical lock confirmation. If the checkbox in the iDrive system does not allow selection, please check if “Acoustical lock/unlock confirmation” in the “Roof Function Center” control unit is set to “Active“ also. Please note that the car has to be equipped with an alarm system.

    Values:
    • Active
    • Not active
    Requirements:
    • “Headunit” CIC control unit
  • Air circulation setting memory

    Enable/disable storing of the air circulation setting. If this function is active, the last used air circulation setting will be restored during the next start of the car.

    Values:
    • Active
    • Not active
    Requirements:
    • “Air Conditioning” IHXXPL2 or “Air Conditioning” IHKAE82E or “Air Conditioning” IHKX_E89 control unit
  • Air conditioning on in AUTO mode

    Enable/disable the automatic activation of the air conditioning when the AUTO mode is turned on.

    Values:
    • Active
    • Not active
    Requirements:
    • “Air Conditioning” IHXXPL2 or “Air Conditioning” IHKAE82E or “Air Conditioning” IHKX_E89 control unit
  • Air conditioning setting memory

    Enable/disable storing of the air conditioning setting. If this function is active, the last used air conditioning setting will be restored during the next start of the car.

    Values:
    • Active
    • Not active
    Requirements:
    • “Air Conditioning” IHXXPL2 or “Air Conditioning” IHKAE82E or “Air Conditioning” IHKX_E89 control unit
  • Alarm duration

    The duration of the alarm.

    Values:
    • Very short
    • Short
    • Relatively short
    • Long
    • Relatively long
    • Very long
    • Maximum
    Requirements:
    • “Anti-theft alarm system” DWA_63 or “Anti-theft alarm system” DWA_IRS control unit
  • Alarm hazard flasher

    The hazard flasher is turned on when the alarm is triggered.

    Values:
    • Active
    • Not active
    Requirements:
    • “Anti-theft alarm system” DWA_63 or “Anti-theft alarm system” DWA_IRS control unit
  • Alarm sound

    The alarm sound that is played when the alarm is triggered.

    Values:
    • Alarm sound Europe
    • Alarm sound Great Britain
    • Alarm sound USA
    Requirements:
    • “Anti-theft alarm system” DWA_63 control unit
  • Alarm with high beam

    The high beam is turned on when the alarm is triggered.

    Values:
    • Active
    • Not active
    Requirements:
    • “Anti-theft alarm system” DWA_63 or “Anti-theft alarm system” DWA_IRS control unit
  • Angel Eyes parking light brightness

    The brightness of the Angel Eyes when the parking light is turned on.

    Values:
    • Off
    • Very low
    • Low
    • Relatively low
    • Medium
    • Relatively high
    • High
    • Very high
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Maximum volume at start-up

    The maximum volume that is saved when the iDrive system is shut off and restored automatically on the next start-up.

    Values:
    • 10%
    • 20%
    • 25%
    • 30%
    • 40%
    • 50%
    Requirements:
    • “Headunit” CIC control unit
  • Auto Start Stop function memory

    Save the last used Auto Start Stop function setting for the next start of the car. Please note that the Auto Start Stop function is automatically activated again in ECO PRO driving mode.

    Values:
    • Active
    • Not active
    Requirements:
    • “Air Conditioning” IHXXPL2 or “Air Conditioning” IHKX_E89 control unit
  • Battery type

    The type and capacity of the 12 V battery. Please note that this value must only be modified if the battery in the car has been replaced. After coding, the battery replacement has to be registered using “BimmerLink” additionally.

    Values:
    • 46 Ah
    • 55 Ah
    • 60 Ah AGM
    • 70 Ah
    • 70 Ah AGM
    • 80 Ah
    • 80 Ah AGM
    • 90 Ah
    • 90 Ah AGM
    • 105 Ah AGM
    • 110 Ah
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Check Control notification brake force display

    Enable/disable the Check Control notification for the brake force display.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification brake light

    Enable/disable the Check Control notification for the brake light.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification fog lights

    Enable/disable the Check Control notification for the fog lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification front parking lights

    Enable/disable the Check Control notification for the front parking lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 control unit
  • Check Control notification front turn signals

    Enable/disable the Check Control notification for the front turn signals.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification high beam

    Enable/disable the Check Control notification for the high beam.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification inner tail lights

    Enable/disable the Check Control notification for the inner tail lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 control unit
  • Check Control notification interior lights

    Enable/disable the Check Control notification for the interior lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Check Control notification license plate lights

    Enable/disable the Check Control notification for the license plate lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification lights

    Enable/disable the Check Control notification that is displayed when the driver door is opened and the lights are still turned on.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification low beam

    Enable/disable the Check Control notification for the low beam.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification outer tail lights

    Enable/disable the Check Control notification for the outer tail lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 control unit
  • Check Control notification parking lights

    Enable/disable the Check Control notification for the parking lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Check Control notification rear left fog light

    Enable/disable the Check Control notification for the rear left fog light.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification rear right fog light

    Enable/disable the Check Control notification for the rear right fog light.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification rear turn signals

    Enable/disable the Check Control notification for the rear turn signals.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification reversing lights

    Enable/disable the Check Control notification for the reversing lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Check Control notification third brake light

    Enable/disable the Check Control notification for the third brake light.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Cancel coming home lights

    The coming home lights are turned off when the high beam lever is pulled a second time.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Coming home lights

    Enable/disable the Coming home lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Coming home lights duration

    The lighting duration of the lights when Coming home lights are activated.

    Values:
    • 40 seconds
    • 90 seconds
    • 150 seconds
    • 240 seconds
    • Off
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Coming home lights with remote control

    Activate coming home lights by pushing the button to open the trunk on the remote control twice.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM3_E89 control unit
  • Extend Coming home lights

    The lighting duration of the coming home lights is extended when the high beam lever is pulled a second time.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Convenient closing

    Enable/disable the convenient closing. During convenient closing the windows are closed and the power folding mirrors are folded in. To trigger convenient closing the lock button on the remote control has to be pressed and held. Please note that this option does not work for convertibles.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convenient closing delay

    The delay for the convenient closing before the windows are closed.

    Values:
    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • No delay
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convenient closing delay front windows

    The delay at which the front windows are closed during convenient closing.

    Values:
    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • 2 seconds
    • 2.5 seconds
    • 3 seconds
    • 3.5 seconds
    • No delay
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convenient closing delay sunroof

    The delay as of with the sunroof is closed during convenient closing.

    Values:
    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • 2 seconds
    • 2.5 seconds
    • 3 seconds
    • 3.5 seconds
    • 6 seconds
    • No delay
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convenient closing with Comfort Access

    Enable/disable the convenient closing with the Comfort Access. For convenient closing with the Comfort Access the door handle has to be touched and held at the ribbed surface. Please note that this option does not work for convertibles.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convenient closing with remote control

    Enable/disable the convenient closing with the remote control. For convenient closing with the remote control, the lock button has to be pressed and held. Please note that this option does not work for convertibles.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convenient opening

    Enable/disable the convenient opening. During convenient opening the windows are opened and the power folding mirrors are unfolded. For a convenient opening the unlock button on the remote control has to be pressed and held. When using Comfort Access, the door handle has to be gripped and held.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convenient opening delay

    The delay for the convenient opening before the windows are opened.

    Values:
    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • 2 seconds
    • 2.5 seconds
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convenient opening delay rear windows

    The delay at which the rear windows are opened during convenient opening.

    Values:
    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • 2 seconds
    • 2.5 seconds
    • 3 seconds
    • 3.5 seconds
    • No delay
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convenient opening delay sunroof

    The delay as of with the sunroof is opened during convenient opening.

    Values:
    • 0.5 seconds
    • 1 second
    • 1.5 seconds
    • 2 seconds
    • 2.5 seconds
    • 3 seconds
    • 3.5 seconds
    • 6 seconds
    • No delay
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convenient opening with remote control

    Enable/disable the convenient opening with the remote control. For convenient opening with the remote control, the unlock button has to be pressed and held.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Convertible top maximum speed

    The maximum speed at which opening and closing of the convertible top is possible while driving.

    Values:
    • 0 km/h
    • 2 km/h
    • 5 km/h
    • 8 km/h
    • 10 km/h
    • 30 km/h
    Requirements:
    • “Convertible Top Module” CTM_E93 or “Convertible Top Module” CVM_E88 or “Convertible Top Module” CTM_E89 control unit
  • Checkbox daytime running light

    Enable/disable the checkbox in the lighting settings in the iDrive system to turn the daytime running light on or off.

    Values:
    • Active
    • Not active
    Requirements:
    • “Headunit” CIC control unit
  • Daytime running light Angel Eyes

    Use the Angel Eyes as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Daytime running light Angel Eyes brightness

    The brightness of the Angel Eyes when used as daytime running light.

    Values:
    • Off
    • Very low
    • Low
    • Relatively low
    • Medium
    • Relatively high
    • High
    • Very high
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Daytime running light dimmed high beam

    Enable/disable the daytime running light using the dimmed high beam.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRMFA control unit
  • Daytime running light dimmed high beam brightness

    The brightness of the daytime running light using the dimmed high beam.

    Values:
    • Very high
    • High
    Requirements:
    • “Footwell Module” FRMFA control unit
  • Daytime running light fog lights

    Use the fog lights as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Daytime running light fog lights brightness

    The brightness of the fog lights when used as daytime running light.

    Values:
    • Off
    • Very low
    • Low
    • Relatively low
    • Medium
    • Relatively high
    • High
    • Very high
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Daytime running light high beam brightness

    The brightness of the dimmed high beam when used as daytime running light.

    Values:
    • Off
    • Very low
    • Low
    • Medium
    • High
    • Very high
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Daytime running light inner tail lights

    Use the inner tail lights as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Daytime running light side markers

    Use the side markers as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Daytime running light tail lights

    Use the tail lights as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Daytime running light tail lights brightness

    The brightness of the tail lights when used as daytime running light.

    Values:
    • Off
    • Very low
    • Low
    • Medium
    • High
    • Very high
    Requirements:
    • “Footwell Module” FRM3_E89 control unit
  • Daytime running light turn signals front

    Use the front turn signals as daytime running light. Please note that “Daytime running light used lights” has to be set to “Additional lights only”.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Daytime running light used lights

    The lights that are used for the daytime running light.

    Values:
    • Off
    • Low beam
    • Dimmed high beam
    • Additional lights only (EU)
    • Additional lights only (US)
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Service history

    Enable/disable the service history in the iDrive system.

    Values:
    • Active
    • Not active
    Requirements:
    • “Headunit” CIC control unit
  • Digital speed correction

    Enable/disable the correction of the digital speedometer.

    Values:
    • Active
    • Not active
    Requirements:
    • “Instrument Cluster” KMBI_PL2 control unit
  • Digital speed in board computer

    Enable/disable the display of the digital speed in the board computer. Please toggle the displayed information in the board computer with the button in the turn signal lever until the specific display appears.

    Values:
    • Active
    • Not active
    Requirements:
    • “Instrument Cluster” KMBI_PL2 control unit
  • Empty menu item in board computer

    Enable/disable the empty menu item in the board computer.

    Values:
    • Active
    • Not active
    Requirements:
    • “Instrument Cluster” KMBI_PL2 control unit
  • Speedometer correction

    Enable/disable the speedometer correction.

    Values:
    • Active
    • Not active
    Requirements:
    • “Instrument Cluster” KMBI_PL2 control unit
  • Automatic lock time

    The car is locked again automatically after it has been unlocked and no door has been opened.

    Values:
    • Not active
    • 1 minute
    • 2 minutes
    • 5 minutes
    • 10 minutes
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Easy access

    If the car is unlocked pushing the unlock button on the remote control twice, the driver door window is lowered when the door is opened.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Lock doors automatically

    The doors are locked automatically when reaching the set speed.

    Values:
    • 2 km/h
    • 4 km/h
    • 8 km/h
    • 16 km/h
    • 24 km/h
    • 32 km/h
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Lock with ignition on

    The doors are locked automatically when the ignition is turned on.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Open the rear window with button in footwell

    Open the rear window instead of the trunk with the button in the footwell.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Rear window open with button outside

    Open the rear window instead of the trunk lid with the button outside.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Rear window open with remote control

    Open the rear window instead of the trunk lid with the remote control.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Selective central locking

    Only the driver door is opened when the unlock button on the remote control is pressed once. When the button is pressed a second time all doors are unlocked.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Unlock doors automatically

    The doors are unlocked automatically when the key is removed. Please note that this only works if the doors have been locked automatically before.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Window lifter interruption when opening a door

    Enable/disable the window lifter interruption when a door is opened.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Window lifters deactivation with engine start

    Enable/disable the interruption of the window lifters when the engine is started.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Window lifters deactivation with ignition off

    The window lifters are deactivated after the time set after the ignition has been turned off.

    Values:
    • 1 minute
    • 2 minutes
    • 5 minutes
    • 10 minutes
    • 15 minutes
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Window lifters deactivation with opening door

    The window lifters are deactivated after the ignition is turned off and the driver door is opened.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Bi-xenon flasher

    Enable/disable the flasher using bi-xenon.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Turn off fog light with flasher

    Turn of the fog light automatically as long as the flasher is activated.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Remaining range warning

    The remaining range at which the range warning is activated.

    Values:
    • 10 kilometers
    • 20 kilometers
    • 30 kilometers
    • 40 kilometers
    • 50 kilometers
    • 100 kilometers
    • Off
    Requirements:
    • “Instrument Cluster” KMBI_PL2 control unit
  • Reserve warning

    The remaining fuel at which the reserve warning is activated.

    Values:
    • 6.5 litres
    • 8 litres
    • 10 litres
    • 12.5 litres
    • 20 litres
    Requirements:
    • “Instrument Cluster” KMBI_PL2 control unit
  • Headlight cleaning blocking time

    The blocking time between headlight cleaning activations.

    Values:
    • 3 minutes
    • 10 minutes
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Headlight cleaning pause between injection pulses

    The pause between the injection pulses of the headlight cleaning system.

    Values:
    • 1000 ms
    • 1200 ms
    • 1500 ms
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Headlight washers

    Activate/deactivate the headlight washers.

    Values:
    • Active
    • Not active
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Number of washing operations for headlight cleaning

    The number of washing operations at which the headlight cleaning is turned on.

    Values:
    • 1 operation
    • 5 operations
    • 10 operations
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Number of water injection pulses during headlight cleaning

    The number of water injection pulses during headlight cleaning.

    Values:
    • 2 times
    • 3 times
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Water injection duration for headlight cleaning

    The duration of the water injection pulses of the headlight cleaning system.

    Values:
    • 500 ms
    • 700 ms
    • 1000 ms
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Fade in/out interior lighting

    The interior lighting is faded in/out.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Turn off Interior lighting after two minutes

    Turn off interior lighting after two minutes automatically.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Comfort Start

    Enable/disable the Comfort Start function. With Comfort Start enabled the START-STOP button has to be pushed briefly only once to start the engine.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Comfort key eject

    Enable/disable the ejection of the key when start-stop button is pressed and held.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • LED conversion Brake Force Display

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion brake light

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion center brake light

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion fog lights

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion front standing lights/Angel Eyes

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRMFA control unit
  • LED conversion front turn signal

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion high beam

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion inner tail lights

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion interior lights

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 control unit
  • LED conversion license plate light

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion low beam

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion outer tail lights

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion outer tail lights as daytime running lights

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 control unit
  • LED conversion position lights

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM3_E89 control unit
  • LED conversion rear fog light

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion rear turn signals

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion reversing light

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • LED conversion side turn signal

    Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Corner LEDs

    Enable/disable the corner LEDs.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 control unit
  • Corner LEDs brightness with high beam

    The brightness of the corner LEDs when the high beam is turned on.

    Values:
    • Off
    • Low
    • Medium
    • High
    Requirements:
    • “Footwell Module” FRM3_E89 control unit
  • Corner LEDs brightness with low beam

    The brightness of the corner LEDs when the low beam is turned on.

    Values:
    • Off
    • Low
    • Medium
    • High
    Requirements:
    • “Footwell Module” FRM3_E89 control unit
  • Fog lights off with high beam

    The fog lights are turned off automatically when the high beam is activated.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Interior lighting with remote control

    The interior lighting is turned on when the button to lock the car on the remote control is pressed after it has been locked.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Parking lights brightness

    The brightness of the parking lights.

    Values:
    • Off
    • Very low
    • Low
    • Relatively low
    • Medium
    • Relatively high
    • High
    • Very high
    Requirements:
    • “Footwell Module” FRM2_E89 control unit
  • Standing lights brightness with high beam

    The brightness of the standing lights with the high beam turned on.

    Values:
    • Off
    • Very low
    • Low
    • Relatively low
    • Medium
    • Relatively high
    • High
    • Very high
    Requirements:
    • “Footwell Module” FRM2_E89 control unit
  • Standing lights brightness with low beam

    The brightness of the standing lights with the low beam turned on.

    Values:
    • Off
    • Very low
    • Low
    • Relatively low
    • Medium
    • Relatively high
    • High
    • Very high
    Requirements:
    • “Footwell Module” FRM2_E89 control unit
  • Automatic mirror tilt

    Enable/disable the automatic mirror tilt for the right mirror, when the reverse gear is engaged. Please note that your car has to be equipped with power folding mirrors.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Fold mirrors with convenient closing

    Enable/disable mirror folding with convenient closing. Please note that your car has to be equipped with power folding mirrors and that this option does not work for convertibles.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • PDC vehicle orientation

    The vehicle orientation in the PDC display.

    Values:
    • Horizontal
    • Vertical
    Requirements:
    • “Headunit” CIC control unit
  • Panic alarm

    Trigger the panic alarm when the button to open the trunk on the remote control is pressed and held. Please note that this requires additional options to be activated in the “Car Access System” if necessary.

    Values:
    • Active
    • Not active
    Requirements:
    • “Anti-theft alarm system” DWA_63 or “Anti-theft alarm system” DWA_IRS control unit
  • Panic alarm activation time

    The duration that the button to open the trunk on the remote control has to be pressed until the panic alarm is triggered.

    Values:
    • 1 second
    • 2 seconds
    • 5 seconds
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Panic alarm duration

    The panic alarm duration if it is not cancelled using the remote control.

    Values:
    • 1 minute
    • 5 minutes
    • 10 minutes
    • 15 minutes
    • Unlimited
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Panic alarm with remote control

    The panic alarm is triggered when the button to open the trunk on the remote control is pressed and held. Please note that the car has to be equipped with an alarm system and the “Panic alarm” option in the “Anti-theft alarm system” control unit has to be enabled also.

    Values:
    • Active
    • Not active
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Seat belt extender driver

    Enable/disable the driver seat belt extender.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Seat belt extender passenger

    Enable/disable the passenger seat belt extender.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Initial seat belt reminder after start

    Activate/deactivate the initial acoustic seat belt reminder after the car is started.

    Values:
    • Active
    • Not active
    Requirements:
    • “Airbag Control Unit” ACSM or “Airbag Control Unit” ACSM2 or “Airbag Control Unit” MRS5 or “Airbag Control Unit” MRS5CD or “Airbag Control Unit” MRS7 or “Airbag Control Unit” MRS8 control unit
  • Seat belt reminder driver seat

    Activate/deactivate the acoustic and visual seat belt reminder for the driver seat.

    Values:
    • Active
    • Not active
    Requirements:
    • “Airbag Control Unit” ACSM or “Airbag Control Unit” ACSM2 or “Airbag Control Unit” MRS5 or “Airbag Control Unit” MRS5CD or “Airbag Control Unit” MRS7 or “Airbag Control Unit” MRS8 control unit
  • Seat belt reminder passenger seat

    Activate/deactivate the acoustic and visual seat belt reminder for the passenger seat.

    Values:
    • Active
    • Not active
    Requirements:
    • “Airbag Control Unit” ACSM or “Airbag Control Unit” ACSM2 or “Airbag Control Unit” MRS5 or “Airbag Control Unit” MRS5CD or “Airbag Control Unit” MRS7 or “Airbag Control Unit” MRS8 control unit
  • Alarm system activation/deactivation

    Enable/disable the alarm system with the remote control or a key. For theft prevention it may be beneficial to allow deactivation of the alarm system with the remote control only.

    Values:
    • With key or remote control
    • With remote control only
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Comfort Access deactivation

    Disable the Comfort Access for theft prevention. Please note that this requires the key to be inserted to start the engine. Use a backup to revert this coding once it has been applied.

    Values:
    • Deactivated
    Requirements:
    • “Car Access System” CAS2 or “Car Access System” CAS3 control unit
  • Double pulse hazard flasher

    Enable/disable the double pulse hazard flasher.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Flash when locking

    Enable/disable the flashing when the car is locked.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Flash when unlocking

    Enable/disable the flashing when the car is unlocked.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • One-touch turn signal duration

    The duration of the one-touch signal.

    Values:
    • 1 time
    • 3 times
    • 5 times
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • US sidemarker brightness

    The brightness of the US sidemarkers.

    Values:
    • Off
    • Very low
    • Low
    • Medium
    • High
    • Very high
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRMFA control unit
  • US sidemarker brightness

    The brightness of the US sidemarkers.

    Values:
    • Off
    • Very low
    • Low
    • Relatively low
    • Medium
    • Relatively high
    • High
    • Very high
    Requirements:
    • “Footwell Module” FRM3_E89 control unit
  • US sidemarkers

    Enable/disable the US style sidemarkers using the turn signals or separate lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Video in motion

    Activate video in motion. Use a backup to revert this coding once it has been applied.

    Values:
    • Active
    Requirements:
    • “Headunit” CIC or “Headunit” CCC_APP control unit
  • Ignition key warning

    Enable/disable the ignition key warning

    Values:
    • Active
    • Not active
    Requirements:
    • “Instrument Cluster” KMBI_PL2 control unit
  • Speed limit warning

    A warning is displayed if the set speed limit is exceeded.

    Values:
    • 120 km/h
    • 190 km/h
    • 210 km/h
    • 240 km/h
    • Off
    Requirements:
    • “Instrument Cluster” KMBI_PL2 control unit
  • Temperature warning

    Enable/disable the temperature warning.

    Values:
    • Active
    • Not active
    Requirements:
    • “Instrument Cluster” KMBI_PL2 control unit
  • Welcome Light lighting duration

    The lighting duration of the Welcome Light.

    Values:
    • 5 seconds
    • 10 seconds
    • 20 seconds
    • 30 seconds
    • 60 seconds
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights

    Enable/disable the Welcome Lights.

    Values:
    • Active
    • Not active
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights brake lights

    The brake lights are turned on with the Welcome Lights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Welcome Lights fog lights

    The fog lights are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights front turn signals

    The front turn signals are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights high beam

    The high beam is turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights license plate lights

    The license plate lights are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights low beam

    The low beam is turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights parking lights front

    The front parking lights are turned on with the Welcome Lights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights parking lights rear

    The rear parking lights are turned on with the Welcome Lights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights rear fog light

    The rear fog light is turned on with the Welcome Lights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights sidemarkers

    The sidemarkers are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Welcome Lights third brake light.

    The third brake light is turned on with the Welcome Lights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 control unit
  • Welcome Lights turn signals front

    The front turn signals are turned on with the Welcome Lights.

    Values:
    • Hard on
    • Off
    • Soft on
    Requirements:
    • “Footwell Module” FRM2_E89 or “Footwell Module” FRM3_E89 or “Footwell Module” FRMFA control unit
  • Automatic rear wiper in reverse

    Enable/disable the automatic rear wiper activation when reverse gear is engaged.

    Values:
    • Active
    • Not active
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Complete wiper cycle

    Enable/disable the completion of the wiper cycle when the car is turned off.

    Values:
    • Active
    • Not active
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Front window cleaning delay

    The delay between the spraying of the front window and the cleaning afterwards.

    Values:
    • 100 ms
    • 300 ms
    • 500 ms
    • 700 ms
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Front wiper interval at standstill

    The front wiper interval when the car is standing still.

    Values:
    • 3 seconds
    • 5 seconds
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Rear window cleaning delay

    The delay between the spraying of the rear window and the cleaning afterwards.

    Values:
    • 100 ms
    • 300 ms
    • 500 ms
    • 700 ms
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Rear wiper interval

    The rear wiper interval.

    Values:
    • 2 seconds
    • 4 seconds
    • 6 seconds
    • 8 seconds
    • 12 seconds
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Wipe cycles after front washing

    The number of wipe cycles after front washing

    Values:
    • 1 time
    • 2 times
    • 3 times
    • 4 times
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Wipe cycles after rear washing

    The number of wipe cycles after rear washing.

    Values:
    • 1 time
    • 2 times
    • 3 times
    • 4 times
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
  • Wiper level switch back when stationary

    Enable/disable the automatic switch back of the wiper level when the car becomes stationary.

    Values:
    • Active
    • Not active
    Requirements:
    • “Junction Box Passenger” JBBFE or “Junction Box Passenger” JBBFE3R or “Junction Box Passenger” JBBFEII control unit
We use cookies to optimize the website and user-experience. Learn more in our Privacy Policy.